Connecting Power Supply - Medion F2 Revision 22 Operating Instructions Manual

5.16. Connecting power supply

Finally, connect your PC and monitor to the power supply.
 Plug the mains cable into the socket and then connect it to the mains cable
socket on your PC.
Please observe the following safety information:
DANGER!
Risk of electric shock!
Even when the mains switch is off, some components
of the device are live.
 Pull the mains plug out of the socket to disconnect
your PC from the power supply and isolate the
device entirely from voltage sources.
 The mains plug socket must be near the PC and easy
to reach.
 Only operate the PC on earthed, domestic power
supply sockets.
 Use only the mains cable supplied.
 For extra safety, we recommend using an
overvoltage protection device to prevent your PC
from sustaining damage from the mains supply as a
result of power surges or lightning strikes.
 The standard PC mains adapter has an on and an
off switch. These can be used to switch the PC on
and off. When the switch is at the OFF (0) setting, no
power is being supplied.
 Please read the next section first to find out what you need to look out for
during start-up.
Do not start up your PC yet!
19 of 48