Optical Drive (Optional); Loading A Disc - Medion F2 Revision 22 Operating Instructions Manual

10. Optical drive (optional)

10.1. Loading a disc

PLEASE NOTE!
Risk of damage!
The high speeds in the drive can cause defective media
to break and damage your device. Damage caused by
faulty media is not covered under warranty and repairs
will be chargeable.
 Do not use scratched, broken, dirty or poor quality
discs.
 Do not stick protective film or other stickers onto
the discs because the adhesive could damage the
surface of the disc and destroy your data.
 Inspect discs carefully before inserting them. If
damage or dirt is visible, do not use these discs.
 Press the eject button on the optical drive to open the drawer.
 Insert the disc into the drawer with the label facing upwards so that it is lying flat.
 Carefully push the drawer until you feel some resistance and the drawer
automatically moves back into the optical drive.
In the factory settings, your optical drive is allocated the drive letter "E:\". You can
conveniently access the data on your discs using Windows Explorer (Computer). Run
Windows Explorer using the shortcut on the taskbar or by simultaneously pressing
the Windows key and the "E" key. When accessing DVD videos (or audio and video files
on conventional data CDs), the pre-installed media player is used automatically.
10.1.1. Removing the disc
PLEASE NOTE!
Data loss!
Do not try to remove the disc from the drive while the PC
is accessing the optical drive.
 In order to remove the disc, press the eject button again.
 Remove the disc and store it in a CD case.
 Close the drive again.
30 of 48