Connecting Power Supply - Medion P5370 E User Manual

Connecting power supply

Finally, connect your PC and monitor to the power supply.
− Plug the mains cable into the socket and then connect it to the mains cable
socket 5 on your PC.
Please observe the following safety information:
DANGER!
Risk of electric shock!
Even when the mains switch
device are live.
− Pull the mains plug out of the socket to disconnect your PC from
the power supply and isolate the device entirely from voltage
sources.
− The mains plug socket must be near the PC and easy to reach.
− Only operate the PC on earthed, domestic power supply
sockets.
− Use only the mains cable supplied.
− For extra safety, we recommend using an overvoltage
protection device to prevent your PC from sustaining damage
from the mains supply as a result of power surges or lightning
strikes.
− The standard PC mains adapter has an on and an off switch.
These can be used to switch the PC on and off. When the switch
is at the OFF (0) setting, no power is being supplied.
− Please read the next section fi rst to fi nd out what you need to look out for during
start-up.
is off, some components of the
1
Do not start up your PC yet!
Connecting
23