Connecting The Power Supply - Medion AKOYA MINI PC Manual

Connecting the Power Supply

Diagram reference: I
Finally, connect the power supply to your AKOYA MINI PC and monitor.
1. Connect the power adapter (included) to the AKOYA MINI PC (I).
2. Then, connect the power cord to the adapter and plug it into a wall outlet.
Observe the following safety precautions:
Please note:
Even with the power switch switched off some parts of the device receive
current. You must unplug the power plug from the socket, if you want
to interrupt the power supply to your AKOYA MINI PC or cut off your
device from current entirely.

Do not open the housing of the power adapter. Opening the housing could re-
sult in an electric shock. It does not contain any parts that require maintenance.

The power socket must be in the vicinity of the AKOYA MINI PC and within
reach of the power cables. Do not stretch the power cables tightly to reach a
power socket.

Only operate the AKOYA MINI PC on grounded plugs of the domestic power
net.

Only use the mains/power cord included with the device.

Do not cover up the power adapter in order to prevent damage from overheat-
ing.

Stop using the power adapter if the housing or cord has been damaged. Re-
place it with a power adapter of the same type.

To provide additional protection against electric shock, power surges, lightning
strikes, or other electrical damage to your AKOYA MINI PC , we recommend the
use of a surge protector.

If you are using an extension cord, ensure that the cord meets your local safety
requirements. If in doubt, ask an electrician.

The power supply unit has an On/Off switch that can be used to power off the
AKOYA MINI PC. When the switch is Off (0) no power is being consumed.
First, read the following section to find out what you need to know in order to get
started.
18
Do not start your AKOYA MINI PC yet!
English