Setup - ACU-RITE 06058 Instruction Manual

SETUP

Display Setup
Plug Power Adapter into Electrical Outlet
Settings
After powering on for the first time, the display will automatically enter setup
mode. Follow the on-screen instructions to set up the display.
T
To adjust the currently selected item, press and release the " " or " "
V
buttons.
To save your adjustments, press and release the " " button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE (PST, MST, CST, EST, AST, HAST, NST, AKST)
AUTO DST (Daylight Saving Time YES or NO)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
PRESSURE UNITS (inHg or hPa)
TEMPERATURE UNITS (ºF or ºC)
WIND SPEED UNITS (mph, km/h, knots)
RAINFALL UNITS (inches or mm)
DISTANCE UNITS (miles or kilometers)
AUTO DIM (YES or NO)**
AUTO CYCLE (OFF, 15 sec., 30 sec., 60 sec., 2 min., 5 min.)
ALERT VOLUME
*If you live in an area that observes Daylight Saving Time, DST should be set to YES,
even if it is not currently Daylight Saving Time.
**For more information see page 12, under "Display".
Enter setup mode at any time by pressing the " " button to access the menu,
then navigate to "Setup" and press and release the " " button.
7