Motorola FR6070Enterprise User Manual page 58

Headset
Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony applications.
To connect the headset, remove the plug from the headset jack at the top of the FR6070and insert the headset
connector. Contact a Motorola representative for compatible headsets.
For best performance, Motorola recommends a 2.5mm jack headset, p/n 50-11300-050R.
Headset Connection
Figure 6-5
Cables
This section describes how to set up and use the cables. The cables are available with a variety of
connection capabilities.
The following communication/charge cables are available:
•
USB Client Charge cable (standard-A connector and a barrel receptacle for power)
• Auto charge cable
• Charge only cable.
The following printer cables are available directly from Motorola:
•
O'Neil Printer cable
•
Zebra Printer cable.
Cables
Figure 6-6
Communication/charge cables:
•
Provide the FR6070with operating and charging power when used with the Motorola approved power
64
Accessories