Operation - Gravely ZT Xl Bagger Owners Operating Manual And Parts List

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
CAUTION: Do not tow anything with the hitch
when the bagger is installed.
BEFORE EACH USE
WARNING: Under normal usage the mesh bags
are subject to deterioration and wear and MUST
be checked frequently for necessary
replacement. Any replacement mesh bags
should be checked to ensure compliance with
the original manufacturer's recommendations or
specifications.
1. Check bagger parts for wear, deterioration, or
damage. Replace ONLY with Ariens/Gravely
original service parts before operating.
2. Make sure counterweights are installed.
3. Ensure all hardware is tight.
4. Remove any grass buildup from bagger parts.
5. Ensure hose is fastened securely on blower
assembly.
6. Ensure mesh bags are installed, and the bagger
cover is closed and securely latched.
OPERATING THE BAGGER
Starting
1. Start engine and engage PTO (see unit's
Operator's Manual).
2. Set throttle to full.
3. Set mower deck height.
4. Choose a slow ground speed.
Shutting Off
WARNING: Lower attachment, stop engine, and
remove key to prevent unauthorized use. DO
NOT park on slopes.
1. Disengage PTO.
2. Shut off unit (see unit's Operator's Manual).

OPERATION

AIRFLOW INDICATOR (FIGURE 20)
When the airflow indicator is pointed straight up, the air is
restricted which indicates one or more possible
problems:
• The mesh bags are full and need to be emptied.
See Emptying Mesh Bags on page 19.
• There is a clog in the bagger. See Unclogging
Bagger on page 19.
When the airflow indicator is facing forward, the air is
unrestricted indicating that the mesh bags are not full and
there are no clogs in the bagger.
Airflow
Restricted
GB – 18
Airflow
Unrestricted
Airflow
Indicator