Gravely ZT Xl Bagger Owners Operating Manual And Parts List page 16

Thread bag frame (item 26) through
sleeve in mesh bag (item 24).
Install 3/8 x 1/2 x 3 plastic tube
(item 25) on each end of frame and
push the ends together.
Figure 15
INSTALL MESH BAGS (FIGURE 16)
CAUTION: MAKE SURE the heat resistant
(smooth side) side of the mesh bags are facing
the unit.
1. Install mesh bags (item 24) on cover assembly
(item 10) with the heat resistant (smooth side) side
of the bags facing the unit.
24
MAKE SURE the heat
resistant side (smooth side)
INSTALL HOSE
Trim Hose (Figure 17)
NOTE: Different size decks require different hose
lengths.
1. Position bagger hose (item 23) and trim to fit if
specified in figure 17.
bagger
hose
(item 23)
Mower Deck
42-Inch
48-Inch
54-Inch
Install Hose (Figure 18)
1. Install bagger hose (item 23) on blower and idler
assembly (item 1) and cover assembly (item 10).
2. Flip up thumb latch and push bagger hose (item 23)
into the latch. Flip down the latch, making sure the
latch is attached to a rib on the hose.
GB – 16
faces the unit.
Figure 16
Hose Length
Trim to fit.
Does not need to be trimmed.
Does not need to be trimmed.
Figure 17
10
Hose
Length
OEe022