Subscribe to Our Youtube Channel
Related Manuals for Gravely ZT 2044 XLP
Summary of Contents for Gravely ZT 2044 XLP
- Page 1 ZT XLP Owner/Operator Manual 992140 - ZT 2044 XLP 992143 - ZT 2348 XLP ENGLISH FRANÇAIS ESPAÑOL 00826700 10/05 Printed in USA...
-
Page 2: Table Of Contents
PRODUCT REGISTRATION Before operation of unit, carefully and completely read your The Gravely dealer must register the product at the time of manuals. The contents will provide you with an understanding of purchase. Registering the product will help the company process safety instructions and controls during normal operation and warranty claims or contact you with the latest service information. -
Page 3: Safety
5. Explain recommended lubrication and maintenance. Customer Note: Your Dealer has been provided complete set-up Advise customer on adjustments. Instruct customer on and preparation instructions which must be completed prior to controls and operation of unit. Discuss and emphasize the you taking delivery of this unit. - Page 4 SAFETY DECALS AND LOCATIONS ALWAYS replace missing or damaged Safety Decals. Refer to Figure 2 for Safety Decal locations. OF1625 Figure 2 1. DANGER! TO AVOID SERIOUS INJURY OR • If machine stops going uphill, stop blade and back down slowly.
- Page 5 3. WARNING! DO NOT operate near drop-offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or Do not operate mower unless guards are in operating position or ditch, or if an edge caves in. bagger is attached.
- Page 6 Start and operate unit only when seated in operator’s position. Use a slow speed. Tires may lose traction on slopes even though Steering control levers must be in neutral, PTO disengaged and the brakes are functioning properly. parking brake set when starting engine. Do not bypass transmission when on a slope.
-
Page 7: Assembly
ALWAYS wear safety glasses and protective gear near battery. Maintain or replace safety and instruction labels, as necessary. Use insulated tools. NEVER store unit with fuel in fuel tank, inside a building where DO NOT TIP battery beyond a 45° angle in any direction. any ignition sources are present. -
Page 8: Controls And Features
If the unit does not perform as stated, contact your Gravely dealer for repairs. NOTE: When the parking brake is engaged, the steering levers are locked in neutral. - Page 9 Steering Levers Power Take Off (PTO) Switch Power take off (PTO) switch engages and disengages the mower blades. Pull the power take off (PTO) switch to "On" position to engage mower blades. Push the power take off (PTO) switch to "Off" position to disengage mower blades.
- Page 10 FILLING FUEL TANK STARTING AND SHUT OFF CAUTION: Read entire Owner/Operator Manual, Clutch WARNING: AVOID INJURY. Read and understand Manual, and Engine Manual first. DO NOT attempt to entire Safety section before proceeding. start engine at this time. Add fuel to Fuel Tank as needed. See your Engine Manual for To start the engine: correct type and grade of fuel.
- Page 11 PARKING FOR BEST PERFORMANCE To park the unit: Cut grass when it is dry. 1. Bring the steering levers to neutral. Turn off PTO. Keep mower blades sharp. 2. Move the throttle lever to the “Slow” position. Keep mower deck properly levelled. 3.
-
Page 12: Maintenance Schedule
MAINTENANCE SCHEDULE Proper maintenance can prolong the life of unit. The following WARNING: AVOID INJURY. Read and understand charts show the recommended service schedule. More frequent entire Safety section before proceeding. service may be required due to working conditions (heavy loads, high ambient temperatures, dusty conditions, or airborne debris). -
Page 13: Service And Adjustments
Gravely Dealers will provide any service which may be required to HYDRAULIC FLUID keep your unit operating at peak efficiency. Should engine service be required, it can be obtained from a Gravely Dealer or the WARNING: HYDRAULIC FLUID can result in severe engine manufacturer’s authorized service center. - Page 14 7. Add new oil to the oil tank. It will take about 1.5 quarts DO NOT Sharpen to This Pattern (1.4 L). Use Mobil 1 Extended Performance 15W50 Synthetic Oil or equivalent for best component life (Gravely p/n 00057100) 8. Properly dispose of waste oil.
- Page 15 Jump-Starting 8. Move steering levers from Forward to Reverse several times and return steering levers to neutral position. Check Gravely does not recommend jump-starting your unit. wheel(s) for movement. Jump-starting can damage engine and electrical system 9. If wheel is still moving, repeat steps 7 and 8.
- Page 16 ADJUSTING THE UNIT TO TRACK STRAIGHT WARNING: Prior to adjusting the tracking of the unit, shut OFF engine, engage parking brake, and remove the ignition key. Check and adjust tire pressure. Increase pressure on side unit tracks to. DO NOT exceed maximum recommended tire pressure (See Specifications on page 21).
- Page 17 1. Shut OFF engine. Engage parking brake. Remove the PTO BELT ignition key. 2. Remove the spacer, handle, and eccentric spacer from the WARNING: MOVING PARTS can cut or amputate steering lever. body parts. ALWAYS wait for moving parts to stop before performing maintenance or service.
- Page 18 Remove PTO Belt CAUTION: Use care when releasing idler spring tension. Keep body parts well away from idlers when performing this operation. 1. Slowly release the tension on the PTO belt idler until all the tension is removed from the springs. 2.
- Page 19 5. Measure the distance between the ground and cutting edge of the blade on the left blade (Left position in Figure 19) and on the right blade (Right position in Figure 19). Distances should be within 3/16 in. (4.7 mm). If they are not, raise the low side of the deck using the height adjusters on the deck lift brackets (see Figure 20).
-
Page 20: Storage
Adjust Blade Height ACCESSORIES Level and pitch the mower with the height adjusters on each deck Part No. Description lift bracket (Figure 20). 79202300 Hitch Kit Loosen the jam nut on the deck lift bracket bolt about 1/4 turn to reduce clamp load on the height adjusters. 79203900 Headlight Kit Loosen the jam nut on the deck adjuster bolt and then turn... -
Page 21: Specifications
SPECIFICATIONS Model Number 992140 992143 Model ZT 2044 XLP ZT 2348 XLP Engine Engine Kohler Engine Model Number SV710 SV720 Engine Power – hp (kW) at Maximum RPM 20 (14.4) 23 (17.2) Governed RPM (May be different from maximum RPM) -
Page 22: Warranty
1000 hours of use, whichever comes first. An upon examination by the Ariens Company to be defective or authorized Gravely dealer will repair any defect in material or worn out. Replacements will be supplied free of charge. - Page 23 • Warranty service must be performed by a respective Ariens or Gravely authorized service representative. • Parts that are not genuine Ariens or Gravely brand service parts are not covered by this warranty. • To find an Ariens or Gravely authorized service representative, contact Ariens at: •...
- Page 24 GRAVELY 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.gravely.com WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Need help?
Do you have a question about the ZT 2044 XLP and is the answer not in the manual?
Questions and answers