Gravely ZT Xl Bagger Owners Operating Manual And Parts List page 14

Install Belt Cover – 48- and 54-Inch Decks
1. Install the 5/16" x 2-3/4" standoff (item 19) on
mower deck with a 5/16" nylon locknut (item 39).
2. Install 48-, 54-inch belt cover (item 5) on blower
and idler assembly (item 1) with two 3/8" x 1-1/2 x
1/16" washers (item 4), and 5/16" wing knob
(item 2).
3. Install 48-, 54-inch belt cover (item 5) on 5/16" x
2-3/4" standoff (item 19) with a 3/8" x 1" hex bolt
(item 31), 3/8" x lock washer (item 32) and 5/16"
locknut (item 6).
48- and 54-Inch Mower Decks
1
Figure 11
Install Belt Cover – 42-Inch Decks
1. Install one 5/16" x 2-3/4" standoff (item 19) on
mower deck.
2. Install 42-inch belt cover (item 5) on blower and
idler assembly (item 1) with two 3/8" x 1-1/2 x 1/16"
washers (item 4), and 5/16" wing knob (item 2).
3. Install 42-inch belt cover (item 5) on 5/16" x 2-3/4"
standoff (item 19) with two 3/8" x 1-1/2 x 1/16"
washers (item 4) and one 5/16" locknut (item 6).
4
2
5
4
39
19
42-Inch Mower Decks
1
6
32
4
INSTALL COVER ASSEMBLY (FIGURE 13)
1. Install rear mounting plate (item 30) on frame with
four 3/8" x 1" hex bolts (item 31) and 3/8" nylon
locknuts (item 37).
2. Install two 1/2" x 1" hex bolts (item 36) on rear
mounting plate (item 30) and frame with 1/2" nylon
locknuts (item 29).
3. Place four 13/32" x 1-1/2 x 1/4" washers (item 33)
in the weld studs on the rear bagger mount.
GB – 14
2
4
5
6
4
19
Figure 12
4