Removal - Gravely ZT Xl Bagger Owners Operating Manual And Parts List

10 23
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
1. Flip up thumb latch and remove bagger hose from
cover assembly and blower and idler assembly (see
figure 18 on page 17).
2. Remove mesh bags from cover assembly (see
figure 16 on page 16).
3. Remove cover assembly from unit (see figure 13 on
page 15).
NOTE: The rear mounting plate does not need to be
removed.
4. Remove belt cover from mower deck and blower
and idler assembly (see figure 11 on page 14 or
see figure 12 on page 14).
5. Remove V-Belt (see figure 9 on page 13).
6. Remove blower and idler assembly (see figure 8 on
page 12).
Thumb
Latch
1
Figure 18

REMOVAL

7. Remove sheave adapter and 4" sheave (see
figure 7 on page 11).
8. Install washer and the original hex bolt on right
mower deck spindle (see figure 6 on page 11).
9. Install right belt cover on mower deck (see figure 6
on page 11).
CAUTION: Deflected material may cause injury.
ALWAYS operate mower with bagger cover
closed and secured, blower assembly fastened
securely, or with chute deflector in operating
position.
10. Install discharge chute.
WARNING: ALWAYS install counterweights
before operating unit with bagger attached.
Always remove counterweights from unit when
bagger is removed from unit.
11. Remove counterweight from unit (see figure 5 and
4 on page 10).
GB – 17