Factory Default Settings; Get Firmware Revision Number; Get Product Serial Number - Honeywell HH480 User Manual

Factory Default Settings
This selection erases all your settings and resets the scanner to the original factory defaults.
Scan the Recall Default barcode. This will erase all previous settings and return to the scanner's factory default settings.
Get Firmware Revision Number
Scan the following barcode, scanner will output the software revision number.
Get Product Serial Number
Scan the following barcode, scanner will output the product serial number. It's an unique number to each unit.
Recall Default
Firmware Revision
Product Serial Number
1 -­ 4