Cabin Temperature Fail; Probable Cause - Mahindra mHAWK XYLO E9 Diagnostic Manual

Hide thumbs

Diagnostic Manual (DIS)

Xylo mHawk (E9)

Cabin Temperature Sensor

The cabin temperature sensor is located in the passenger compartment near the DLC connector and is

used to sense the cabin air temperature. The cabin temperature value is displayed in DIS

Normal Operation



Ignition ON, DIS receives the cabin temperature signal

from the sensor and is with in the range

DTC detection condition



Ignition ON



The cabin temperature sensor received is not in the valid

range

Lamp status



Nil

Reaction:



In DIS the cabin temperature will be displayed as "- - "

Healing condition



Ignition OFF/ON

The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the

manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,

are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,

B3005 – Cabin Temperature Fail

DTC Summary

MAN-00179

Feb 2012/Rev 1