9 Appendix A: Procedure for entering alphanumeric and
special characters
The section describes how to enter digits, upper and lower case alphabets, and special
characters using the DPH-70L keypad.
9.1 Entering Digits
•
Press any digit key once to enter the corresponding digit.
Example:
9.2 Entering Small Letters
•
Press a digit key twice to enter the first character written on that key.
•
Press thrice to enter the second character written on that key
•
Press four times to enter the third character written on that key.
•
Press five times to enter the fourth character written on that key.
Examples:
NOTE: Press the appropriate key firmly, specified number of times, in quick succession to enter
alphabets.
9.3 Entering Capital Letters
You need to press a SHIFT button and a digit key, specified number of times, to enter the capital
letters marked on digit keys. SHIFT LED turns on after SHIFT button is pressed and turns off after
the digit key is pressed.
•
Press a SHIFT button and then the digit key, the following number of times to enter the
capital letters.
Twice to enter the capital of the first letter written on that key.
o
Thrice to enter the capital of the second letter written on that key.
o
Four times to enter the capital of the third letter written on that key.
o
Five times to enter the capital of the fourth letter written on that key.
o
•
If the key is pressed once after SHIFT button is pressed, it accepts the corresponding
digit.
Examples:
NOTE: Press the appropriate key firmly, specified number of times, in quick succession to enter
alphabets.
9.4 Entering Special Characters
Press VoIP button and then press the corresponding key mentioned in table below to enter
special characters. VoIP LED turns on after pressing the VoIP button and turns off after
accepting a special character.
To enter 4, press key 4 once.
To enter a, press key 2 two times.
To enter e, press key 3 three times.
To enter z, press key 9 five times.
To enter A, press SHIFT followed by key 2 two times.
To enter E, press SHIFT followed by key 3 three times.
To enter Z, press SHIFT followed by key 9 five times.
DPH-70L User's Guide
25