Ring Tone - D-Link DPH-70L User Manual

Netherlands
Singapore
Switzerland
If you enter a value other than the listed, the phone prompts with a message "Incorrect value".
Choose appropriately.
Based on the country code selection, the various tones and modem software will vary. Default
country code is 2 (India). If you change it to some other country than yours, the phone may not be
able to make calls and you will see some error message. So please be sure to select the correct
country code.
7.3.4

Ring Tone

Here list of supported ring tones is displayed with star suffixed on the currently selected ring tone.
To select a different ring tone from the list, you can move the cursor to the ring tone using the up
and down arrow keys and press 'ENTER'.
7.3.5 Dial Prefix
This feature enables DPH-70L to add a prefix to all dialed VoIP phone number. For example, if
you configure this field to '00' and dial '1 786 926' to make VoIP call, the phone will dial '001 786
926'. The default value is NULL i.e. no dial prefix. Please consult your service provider before
changing this field. This option is used only for dialing VoIP numbers.
7.3.6 Wait for dial tone
DPH-70L has special supports for operation behind an EPABX. In some scenarios, you may have
to wait for secondary dial tone before dialing the complete number. You can configure the number
of digits after which phone should wait for secondary dial tone before dialing remaining ISP phone
number in this option. Configure '0' to disable this option. For example, if ISP phone number is
96788341 and wait for dial tone is configured as 2 then phone will dial first 2 digits i.e. 96 and
then it will wait for secondary dial tone before dialing other digits (788341). This option is used
only for dialing ISP phone number.
7.3.7 Blind Dialing Mode
DPH-70L supports a mode called blind dialing mode. In this mode, DPH-70L won't look for dial
tone on line before dialing the ISP number or while making call in normal PSTN mode. User can
enable this feature for dialing ISP number in blind mode. Default mode is 'DISABLE'.
Warning: In blind dial mode DPH-70L won't display any error messages related to line conditions.
Italy
Japan
Norway
Poland
Portugal
Spain
Sweden
UK
Others
17
18
19
20
21
22
23
24
25
26
27
28
DPH-70L User's Guide
20