Table of Contents
Advertisement
BERNINA
Overlocker Workbook 2
Fabric:
Medium weight cotton, 3" x 8", 2 pieces
Medium weight cotton bias strip, 2" x 8"
12" length of ⅜" cotton filler cord
Needle:
80/12 Universal
Thread:
4 cones of overlocker thread
Presser Foot:
Multi-Purpose Foot with Guide
Stitch:
4-thread overlock
Set the overlocker for a 4-thread overlock. Adjust settings as
directed below.
Attach the Multi-Purpose Foot and Guide following the directions in
the instruction manual for the Multi-Purpose Foot with Guide.
Note: 700D and 800DL need the Attachment Base to accommodate
the Guide.
Place one of the 3" x 8" pieces of fabric under the foot, right side up.
Wrap the bias strip around the cord and place the wrapped cord in
the groove under the foot and on top of the other fabric.
Position the second piece of fabric, right side down, on top of the
first with the wrapped piping between them.
Overlock, making the covered cord and attaching it to the fabric strip
in one stitching.
Press the seam allowance to the wrong side of the fabric strip.
.
7/01/16
Multi-Purpose Foot
:
Inserted Piping
Suggested Settings
Others
Upper Looper
3-5
Lower Looper
3-5
Left Needle
3-5
Right Needle
3-5
Stitch Length
2.5
Cutting Width
2-3
Differential Feed
N
L 460/L 450
3-5
3-5
3-5
3-5
2.5
6
1
8
Advertisement
Table of Contents
