Table of Contents
Advertisement
BERNINA
Overlocker Workbook 2
Fabric:
Medium weight cotton, 4" x 8"
Needle:
80/12 Sharp or JLx2
Thread:
4 cones overlocker thread
Presser Foot:
Coverstitch Foot
Stitch:
4-thread/3-needle coverstitch
Set the overlocker for a 4-thread/3-needle coverstitch. Adjust settings
as directed below. Note: Model 1300MDC needs to be converted from
overlock mode to cover and chain mode.
Attach the Coverstitch presser foot. Center the fabric under the presser
foot. Lift the presser foot and place the fabric completely under the foot.
Turn the handwheel clockwise for the first stitch.
Overlock to the end of the fabric.
At the end of the stitching, turn the handwheel counterclockwise until
the needles are at their lowest position. Then turn the handwheel clock-
wise until the needles are at their highest position to release the
threads from the looper.
Raise the presser foot and carefully remove the work. Note: At the
end of the stitching, turn the handwheel counterclockwise (toward you)
until the needle is at its lowest position. Then turn the handwheel
clockwise (away from you) until the needle is at its highest position
to release the thread from the looper.
Cut the thread using the thread cutter.
Adjust settings as necessary; stitch a second row of coverstitch.
7/01/16
4-thread/3-Needle Coverstitch
Left Needle
Center Needle
Right Needle
Looper
Stitch Length
Differential Feed
Suggested Settings
1300MDC
3.2
5
4
M
3.5
N
L 220
3-5
3-5
3-5
M
3
N
16
Advertisement
Table of Contents
