Installing Memory - Supermicro 8028B-TR4F User Manual

5-5

Installing Memory

Caution! Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Installing Memory Modules (Figure 5-3)
1. Insert the desired number of DIMMs into the memory slots, starting with
P1M1-DIMMA1. (For best performance, please use the memory modules of
the same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory
slot.
4. Align the notches on both ends of the module against the receptive points on
the ends of the slot.
5. Use two thumbs together to press the notches on both ends of the module
straight down into the slot until the module snaps into place.
6. Press the release tabs to the locking positions to secure the DIMM module
into the slot.
Chapter 5: Advanced Serverboard Setup
Figure 5-3. Installing DIMMs
Release
5-11
Notches
Release
Lock/Release Tabs