Table of Contents
Advertisement
VARIOUS SETTING (MENU/Tools)
Data transmission
The procedure to transmit the log data to a PC is as follows.
1. Press the menu button (MENU) to show the menu window. Select "PC 1D", and press the enter key
(ENTER) when the log for one day is necessary. Select "PC All", and press the enter key (ENTER)
when all data recorded is necessary.
( 5 0
o
0 ( 0
2. The Progress screen is displayed. Specify a transfer, capture of text and retention file name by
operation of hyper terminal on PC. Apply "txt" or "csy" to retention file as an extension. Press the
menu button (MENU) to show the menu window. Select "Start", and press the enter key (ENTER).
The transmission is started. "Finished" display means the end of transmission.
P r o g r e s s
S e n d
L o g
F i n i s h e d .
Setting in PC side for transmission of log data (For Windows 2000 and Windows XP)
1. From start button, start the hyper terminal (start button → program → accessory → communication
-hyper terminal).
(when not registered in the start menu, C:¥Program Files¥Windows NT¥hypertrm.exe）
2. Through the hyper terminal display, set new connection, name (for example: Sanyo), setting of
connection, method of connection, COM1, property of COM1 and port.
bit/sec; 9600, data bit; 8, parity; no, stop bit; 1, flow control; Xon/Xoff.
(Communicating condition of MIR side is set as above automatically when the Progress screen is
displayed.)
Note:
For the data transmission, an optional interface board MTR-480 and communication cable of 9 pin Dsub
cross type for RS232C are necessary.
Consult Sanyo sales representative or agent at the time of installation of the optional parts.
o
C )
2 0 1 0 / 0 1 / 0 1
C )
l o g
d a t a
t o
D a t e
2 0 1 0 / 0 1 / 0 1
1 2
P C .
37
M E N U
P C
1 D
P C
A l l
C l e a r
R a n g e 2
C a n c e l
2 4
M E N U
S t a r t
C a n c e l
Hide quick links:
Advertisement
Table of Contents
