Ethernet Setup
This menu configures the display's RS-232 and Ethernet communication ports.
Enable Network
IP Address Settings
Power Status Alert
Source Status Alert
Signal Lost Alert
Load Default
Enable the display's built-in Ethernet port.
Options: No, Yes; Default: No
Enable Dynamic IP mode or set the static IP address of the display's Ethernet port.
Enable an automatic alert when the display is powered down.
Options: No, Yes; Default: No
Enable an automatic alert when the source is changed.
Options: No, Yes; Default: No
Enable an automatic alert when the video signal is lost.
Options: No, Yes; Default: No
Load default communication settings.
Options: No, Yes; Default: No
Planar PS Series User Guide
Advanced Menu
31