Solid-State Drive (Ssd) - HP EliteBook 850 G4 Maintenance And Service Manual

Solid-state drive (SSD)

Description
HP EliteBook 850 G4 Notebook PC models
512 GB, PCIe, Gen3x4, NVMe, TLC
512 GB, PCIe, Gen3x4, NVMe, self-encrypting (SED), Opal 2, TLC
512 GB, PCIe, Gen3x4, NVMe, MLC
512 GB, SATA-3, FIPS-140–2, TLC
360 GB, PCIe, Gen3×4, NVMe, SS, TLC
256 GB, PCIe, Gen3×4, NVMe, TLC
256 GB, SATA-3, self-encrypting (SED), Opal 2, TLC
128 GB, SATA-3
HP ZBook 15u G4 Mobile Workstation models
1 TB, PCIe, Turbo Drive, MLC
512 GB, PCIe, Turbo Drive, MLC
512 GB, PCIe, Turbo Drive, self-encrypting (SED), Opal 2, TLC
512 GB, SATA-3, FIPS, TLC
256 GB, PCIe, Turbo Drive, MLC
256 GB, PCIe, Turbo Drive, TLC
256 GB, SATA-3, self-encrypting (SED), Opal 2, TLC
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0×3.0 screw (1) that secures the drive to the system board.
Bottom cover on page
Battery on page 38).
34).
Component replacement procedures
Spare part number
917758-001
917760-001
917755-001
917382-003
919691-003
917757-001
917759-001
917756-001
915930-001
915931-001
915932-001
920051-001
915933-001
915929-001
915928-001
41