HP EliteBook 850 G4 Maintenance And Service Manual page 83

3. Lift the display assembly straight up and remove it (2).
CAUTION: When installing the display assembly, be sure that the wireless antenna cables are routed
and arranged properly.
Failure to properly route the antennas can result in degradation of the computer's wireless performance.
4. If you need to remove the display bezel, flex the top (1) of the bezel, the inside edges of the left and
right sides (2), and then the bottom (3) of the bezel until it disengages from the display enclosure..
NOTE: Make sure the hinges are not bent (see hinge position in following image) when you remove the
bezel.
5. Remove the display bezel (4).
The display bezel is available using spare part number 821183-001.
Component replacement procedures 71