Processor; User Interface; Inputs And Outputs; Power Specifications (Absorption) - dB Technologies VIO L210 User Manual

PROCESSOR

Internal control:
Advanced functions:
Limiter:

USER INTERFACE

Controls:
LED indicators:
Status LEDs (RDNet network)

INPUTS AND OUTPUTS

Power supply inputs and re-launches:
Audio outputs:
Audio inputs:
RDNet inputs/outputs:
USB (firmware update):

POWER SPECIFICATIONS (ABSORPTION)

Absorption at 1/8 of the power in
average conditions of use (*):
Absorption at 1/3 of the power in
maximum conditions of use (**):
Absorption with the speaker turned
on with no signal (idle):
Inrush current:
Max number of modules in
a re-launched system (**)
[mains input + mains link]:
* NOTE FOR THE INSTALLER: Values refer to 1/8 of the power, in average operating conditions (music program with rare or no clipping).
It is recommended for any type of configuration to consider these as the minimum size values.
** NOTE FOR THE INSTALLER: Values refer to 1/3 of the power, in heavy operating conditions (music program with frequent clipping and
intervention by the limiter). It is recommended to size according to these values in case of professional installations and tours.
VIO-L210
60
Audio Attenuation, 2 rotaries with 8 positions (Coupling, Compensation)
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
1x XLR link OUT balanced
1x XLR IN balanced (insulation: Floating ADC)
Data In / Data Out (etherCON® connectors)
1.6 A (220-240V~) - 2.8 A (100-120V~)
2.7 A / 76 W (220-240V~) - 4.7 A / 70 W (100-120V~)
1 + 5 (220-240V~) / 1 + 3 (100-120V~)
DSP 28/56 bit 48 kHz
FIR Filters
Peak, RMS, Thermal
PowerCON® In/Link
1x MINI USB type B
22 W
21 A
Cod. 420120248 REV. 1.1
English