Download
Share
Print this page
dB Technologies VIO L208 Quick Start User Manual
  1. Manuals
  2. Brands
  3. dB Technologies Manuals
  4. Speakers
  5. VIO L208
  6. Quick start user manual

dB Technologies VIO L208 Quick Start User Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
www.dbtechnologies.com
info@dbtechnologies-aeb.com
Quick start user manual
Section 1
The warnings in this manual must be observed together with the "USER MANUAL - Section 2".
Le avvertenze nel presente manuale devono essere osservate congiuntamente al "MANUALE D'USO - Sezione2".
Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG - Abschnitt 2" beobachtet
werden".
Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES -
Section 2"
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del "MANUAL DEL USUARIO" -
Sección 2".
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com
VIO L208
cod. 420120268Q rev.1.1

Advertisement

loading

Related Manuals for dB Technologies VIO L208

Summary of Contents for dB Technologies VIO L208

  • Page 1 Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” - Sección 2”. A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com VIO L208 cod. 420120268Q rev.1.1...
  • Page 2 Thank you for choosing a dBTechnologies Product! VIO L208 is the new dBTechnologies flagship 2-way professional active line array module. It is equipped with: one 1.4” neodymium compression driver exit (2.5” neodymium voice coil) and two 8” neodymium woofers (2” voice coil).
  • Page 3 - Choose the desired splay angle between the two enclosures. - Fasten the two enclosures using the quick-release pins of the upper VIO L208. - Check that all the pins are properly inserted and locked before other mounting steps. - If you need a flown installation, only one pin is required to secure the movable arm.
  • Page 4 (not supplied). The maximum admitted number of cabinets in different configurations depends on various parameters, like VIO L208 splay angles and DRK-208 tilt. The free dBTechnologies Composer (form version 6.4) software helps the user in the right choice for the best mechanical and acoustical result.
  • Page 5 (1) of the first module of the array. Then connect the useful link audio output (1) to other VIO L208 modules, for the connection of all the line-array elements. Set the Audio Attenuation (2) of the loudspeakers to 0 dB.
  • Page 6 Connect the power link output (9) of the first a) Aurora Net module to the mains input (8) of a second VIO L208 module of the line-array, and so on, in order to link the power supply between all the elements. The...

  • Page 7: Network Software)

    In particular, it can simulate different parameters, for example: mechanical safety in fly-bar use, SPL Those VIO L208 parameters can be controlled by levels in outdoor environment, system coverage, using dBTechnologies Network: system delays. The user-friendly graphic interface helps the user to easily understand in-depth settings.

  • Page 8: Technical Data

    If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.