•
Bring the additional 4 modules with a second DT-VIOL210 cart under the first 4, currently suspended.
•
Apply brakes to the cart and adjust the angles as described in the previous step.
•
Remove the cover and the tubes on the front of DT-VIOL210.
•
Properly lower the 4 suspended modules and hook them as described in the
both front and rear. Pay careful attention to this step when moving the upper suspended block.
•
Complete audio, RDNet and power supply re-launch connections as described in the previous
paragraphs. To find the maximum number of power connections in a re-launched system, see the
TECHNICAL SPECIFICATIONS
VIO-L210
54
section.
English
MECHANICS
paragraph for
Cod. 420120248 REV. 1.1