dB Technologies VIO L210 User Manual page 48

• Place the "HIGH FREQUENCY COMPENSATION" rotary depending
on the type of installation and angulation set in the line array.
This rotary acts on the mid-high frequencies and should be set
to the position:
• All these parameters can be adjusted with the remote control, once the RDNet connections have
been properly made, using the free DBTECHNOLOGIES NETWORK software (free to download from
www.dBTechnologies.com
controls on the panels of the VIO-L210 modules are by-passed. Using this software, you can control
a larger number of parameters (for more information, please refer to the full DBTECHNOLOGIES
NETWORK manual).
Last settings stored on VIOL210 (using DBTECHNOLOGIES NETWORK software), can be
recalled later on the speaker, without RDNet remote control. To do this, turn the rotary
SPEAKER COUPLING on Service/User position.
VIO-L210
48
• 1 - FLAT (no emphasis on any particular frequency range)
• 2 - front fill with the audience at a distance of 0 to 5 m (16 feet)
• 3 - with the audience at a distance of 6-20 m (17-66 feet)
• 4 - with the audience at a distance of 21-30 m (67-98 feet)
• 5 - with the audience at a distance of 31-40 m (99-131 feet)
• 6 - with the audience at a distance of 41-50 m (132-164 feet)
• 7 - with the audience at a distance of 51-60 m (165-197 feet)
• 8 - with the audience at a distance of 61 m (198 feet)
in the DOWNLOADS section). When using the remote control, the local
English
Cod. 420120248 REV. 1.1