Rinsing The Milk Pipework - Miele CM6350 Operating Instructions Manual

Rinsing the milk pipework

Milk residue can clog up the milk pipes
and so the milk pipework should be
rinsed regularly. If a drink has been
made using milk, the prompt to insert
the end of the milk tube into the drip
tray will appear at the latest when you
switch the machine off.
You can also rinse the milk pipework
manually.
 Touch .
 Select
Maintenance
 Select
Rinse milk pipework
touch OK.
 When prompted, place the end of the
milk tube into the right-hand aperture
in the drip tray.
 Touch OK.
The milk pipework will now be rinsed.
and touch OK.
and
Cleaning and care
Cleaning the milk pipework us-
ing the cleaning programme
We recommend using Miele milk pipe-
work cleaning agent for cleaning the
milk pipework. This has been specially
developed for use with Miele coffee
machines and prevents subsequent
damage.
The milk pipework cleaning agent is
available to order from Miele or via the
internet at www.miele-shop.com.
The Clean milk pipework
programme lasts for approx.
15 minutes.
 Touch .
 Select
Maintenance
The cleaning process cannot be can-
celled once it has started. The pro-
cess has to be completed through to
the end.
 Select
Clean milk pipework
touch OK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent
pear in the display.
Preparing the cleaning solution:
 Dissolve the powder in a container
with 200 ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.
maintenance
and touch OK.
and
will ap-
59