Switching On And Off - Miele CM6350 Operating Instructions Manual

Switching on and off

Switching on
 Touch the On/Off sensor .
The machine will begin rinsing after the
heating-up phase. Hot water will come
out of the central spout.
When Select drink
you can make drinks.
If the operating temperature exceeds
60 °C when you switch the machine
on, the rinsing process will not take
place.
If you do not touch any sensors or run a
maintenance programme, the display
will switch itself off after approx.
7 minutes to save energy.
The right hand LED will flash on and off
as long as the machine is switched on.
 Touch any one of the sensors to wake
the machine up again to make a
drink.
24
appears in the display,
Switching off
 Touch the On/Off sensor .
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
If you have made a drink using milk,
Place milk pipe in drip tray
the display.
 Insert the end of the milk pipe into the
aperture in the drip tray, then touch
OK.
If the milk system is not rinsed out be-
fore switching off, it will have to be
rinsed the next time the machine is
switched on.
Switching off for longer peri-
ods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday:
 Empty the drip tray, the waste con-
tainer and the water container.
 Clean all parts thoroughly, including
the brew unit.
 Switch off and withdraw the plug to
disconnect from the mains if neces-
sary.
The time of day will not be saved. It
will have to be reset next time the ma-
chine is switched on.
will appear in