Advertisement
Front panel
1.
MASTER volume control
2.
POWER, SIGNAL, PEAK LED indicators
3.
Power switch
Rear panel
4.
Ventilation grille - do not cover
5.
Mains voltage switch
6.
IEC mains inlet & fuse holder
7.
24Vdc power connection (not RS360)
8.
COM speaker terminal
9.
8Ω speaker terminal
10.
100V speaker terminal
11.
SLAVE OUT connectors (RCA)
12.
SLAVE IN connectors (RCA)
Connection and setup
Connect the rear IEC inlet (6) to the mains using the supplied mains lead (or an equivalent approved
type). Ensure that the voltage is correct as indicated on the voltage selector (5) and that the mains
outlet is switched on.
Alternatively, the RS120 and RS240 can be powered by a 24V battery, such as a lorry or boat
battery, by connecting the "+" and "-" of the battery to the 24Vdc INPUT (7) on the rear panel.
Ensure that DC cables are capable of handling the current (10A min. recommended)
RS Series User Manual
Advertisement
