Front Panel; Rear Panel; Connection And Setup - Adastra V-122 User Manual

Front panel

1. Media player section
2. AUX input (3.5mm) and level control
3. MIC/LINE 1 input (6.3mm) and level control
4. MIC/LINE 2 input (6.3mm) and level control
5. MIC/LINE 3 input (6.3mm) and level control
6. Music input source selectors (CH1 and CH2)

Rear panel

13. IEC mains inlet & fuse holder
14. Speaker connection terminals
15. LINE OUT connectors (RCA)
16. AUX input (RCA parallel with front 3.5mm jack)
17. LINE A & LINE B inputs (RCA)
18. LINE A & LINE B level trim controls

Connection and setup

V-series mixer-amps have 3 main MIC/LINE inputs, which can be connected from the front 6.3mm jack inputs
(3, 4, 5) or via XLR, 6.3mm jack or screw terminal at the rear (20, 22), offering comprehensive input options.
Screw terminal inputs (20) are Euroblock plug-in type and can be removed for convenience during connection.
Connector
XLR
6.3mm
Screw terminal
Balanced wiring
+ -
Pin 2 Pin 3
Tip Ring
+ -
7. MUSIC Level controls (CH1 and CH2)
8. BASS EQ controls (CH1 and CH2)
9. TREBLE EQ controls (CH1 and CH2)
10. MASTER Level controls (CH1 and CH2)
11. Output status LEDs
12. POWER on/off switch
19. MIC/LINE 1, 2, 3 DIP switches
20. MIC/LINE 1, 2, 3 screw terminal inputs
21. PRIORITY switch for MIC/LINE 1 input
22. MIC/LINE 1, 2, 3 XLR/jack inputs
23. 24V mute screw terminals
24. FM/DAB+ ANTENNA connection (F-type)
When using condenser mics that require
phantom power, use balanced wiring via the
XLR or screw terminals.
Ground +
Pin 1 Pin 2
Sleeve Tip
G +
Unbalanced wiring
Ground
Pin 3 Pin 1
Ring Sleeve
- G
953.251UK, 953.252UK User Manual