Table of Contents
Advertisement
Introduction
Thank you for choosing the S460-WIFI internet radio streaming amplifier as part of your
background music system. The wireless connectivity of this product brings together online
audio content and smart phone app control for almost unlimited playback possibilities.
Front panel
1.
Power on/off switch
2.
Input source LED indicators
3.
USB port (for USB stick only)
4.
IR remote control receiver
5.
Previous track (hold for volume down)
Rear panel
11.
Auxiliary line input (L+R RCA)
12.
Channel 1 line output (L+R RCA)
13.
Channel 2 line output (L+R RCA)
14.
RJ45 LAN connector
15.
Bluetooth antenna (SMA connector)
Connections and Setting Up
Position the S460-WIFI on a stable surface within clear reception of the local WiFi signal and where
controls and connections are accessible.
With the unit switched off, connect to the mains supply using the IEC lead provided (19)
Supplied with the amplifier are 2 antennas. Both of these need to be connected to the SMA sockets on
the rear of the amplifier, labelled "BT ANT" and "WIFI ANT" (15, 16) to enable clear reception of
Bluetooth and WiFi signals.
The S460-WIFI amplifier can also play mp3 tracks stored on a USB pen drive, which should be inserted
into the USB port on the front panel (3). Note: this USB port is not suitable for charging smart phones.
6.
Play/Pause (hold for Bluetooth pairing)
7.
Previous track (hold for volume up)
8.
Input select (WPS or hold for reset)
9.
Output 1 L+R volume control
10.
Output 2 L+R volume control
16.
WiFi antenna (SMA connector)
17.
Channel 1 speaker output (L+/-, R+/-)
18.
Channel 2 speaker output (L+/-, R+/-)
19.
IEC mains inlet & fuse holder
103.146UK User Manual
Advertisement
Table of Contents
