Assembly/Panel Removal Rubens 21:9 Styling - Philips 32PFL8605H/12 Service Manual

EN 22 4. Q551.1E LA
1
Figure 4-23 IR & LED Board
1. Remove the stand.
2. Release the clip [1] that secures the IR & LED board.
3. Remove the connectors [2] on the IR/LED board.
When defective, replace the whole unit.
4.8.7 Keyboard Control Board
1. Remove the IR/LED panel as described earlier.
2. Remove the plastic rim as described earlier.
The Keyboard Control Panel is constructed together with the
stand support ("leading edge" assembly) and cannot be
swapped separately.
When defective, replace the whole assembly.
4.8.8 C-balancer Board
Refer to Figure 4-24 for details.
2
Figure 4-24 C-balancer board
1. Unplug all connectors [1].
2. Remove the screws [2].
3. Take the board out.
When defective, replace the whole unit.
4.8.9 LCD Panel
Refer to Figure 4-25 for details.
2010-Oct-01
Mechanical Instructions
2
18750_112_100415.eps
1 1
2 2
18750_115_100415.eps
100415
1. Remove all boards as described earlier.
2. Remove the tweeters as described earlier.
3. Remove the central subwoofer as described earlier.
4. Remove the tweeters as described earlier.
5. Disconnect the Ambilight flat foils as described earlier.
6. Remove the WiFi antenna boards where applicable as
described earlier.
7. Remove the plastic rim as described earlier.
8. Tilt the metal rims [1] on top and both sides of the set as
shown in the picture.
Now the LCD Panel can be lifted from the front cabinet.
4.9

Assembly/Panel Removal Rubens 21:9 Styling

(9955-series)
2
The instructions apply to the 58PFL9955x/xx.
4.9.1 Rear Cover
100415
Warning: Disconnect the mains power cord before you remove
the rear cover.
1. Remove the stand.
2. Remove all screws of the rear cover.
3. Lift the rear cover from the TV. Make sure that wires and
flat coils are not damaged while lifting the rear cover from
the set.
4.9.2 Speakers
The speakers are mounted with four screws.
When defective, replace the whole units.
back to
div. table
18750_116_100415.eps
Figure 4-25 LCD panel
1
1
100415