Keyboard Control Board - Philips 32PFL8605H/12 Service Manual

EN 20 4. Q551.1E LA
3
Figure 4-13 Ambilight units
1. Unplug the flat foil(s) [1].
2. Release the clips [2] that secure the PWB.
3. Slide the PWB out of the set [3].
4.7.7 IR & LED Board
Refer to Figure 4-14 and
1
1
1
Figure 4-14 IR & LED board [1/2]
2
Figure 4-15 IR & LED board [2/2]
The IR/LED board is placed inside the stand support ("leading
edge" assembly).
1. Remove the screws [1].
2. Remove the screws [2] that secure the IR & LED board in
the stand support and take the board out.
3. Unplug the connectors.
When defective, replace the whole unit.
4.7.8

Keyboard Control Board

The Keyboard Control Panel is constructed together with the
stand support ("leading edge" assembly) and cannot be
swapped separately. Refer to section
When defective, replace the entire assembly.
2010-Oct-01
Mechanical Instructions
1
3
2
18750_104_100414.eps
Figure 4-15 for details.
1
1
1
18750_105_100414.eps
2
18750_106_100415.eps
4.7.7 for details.
4.7.9 LCD Panel
Refer to Figure 4-16
1
100414
1
100414
1. Remove all boards as described earlier.
2. Remove the stand support as described earlier.
3. Remove the tweeters as described earlier.
4. Remove the subwoofer as described earlier.
5. Remove all cables.
6. Remove the Vesa stand.
7. Remove the tweeter subframes.
8. Release the clips [1] [2] that secure the LCD panel.
100415
When remounting, ensure that the clips are not bent open!
back to
div. table
to Figure 4-18 for details.
1 1 1
Figure 4-16 LCD board [1/2]
2
Figure 4-17 LCD board [2/2]
Figure 4-18 LCD board -3-
1
1
1
18750_107_100415.eps
100415
18750_108_100415.eps
100415
18750_109_100415.eps
100528