Small Signal Board (Ssb); Lcd Panel - Philips 32PFL8605H/12 Service Manual

EN 18 4. Q551.1E LA
4.6.6

Small Signal Board (SSB)

2
1
2
3
Figure 4-8 SSB
4.6.7

LCD Panel

Refer to Figure 4-16 to
2
2
2
1. Remove the speakers as described earlier.
2. Remove the stand support as described earlier.
3. Remove the PSU as described earlier.
4. Remove the SSB as described earlier.
5. Remove all cables [1], except screen power cables and the
flat foil LVDS cables going in to the screen.
6. Remove all screws [2] that fixate the front bezel.
7. Now turn the screen around and put it front forward at the
work top.
2010-Oct-01
Mechanical Instructions
1
2
3
18754_104_100922.eps
Figure 4-18 for details.
2
2
Figure 4-9 Rear cover 32PFL6805x/xx (applicable to all 6000 series sets)
Refer to
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Release the clips from the bottom cover and slide it
downwards [3].
4 4. Release the clips from the side cover and slide it
sidewards [4].
2
4
2
100922
2
8. The front bezel is sticked to the screen with double sided
thin foam tape. Gently release all tapes. Lift the bezel very
carefully from the screen, while keeping the whole bezel
horizontally. The screw bosses fitted to the bezel must be
straight vertically lifted from their fitting wholes.
When defective, replace the whole unit, including the IR/LED
board.
back to
div. table
Figure 4-8 for details.
2
1
2
2
2
2
2
18754_105_100922.eps
100922