Av Pip Board; Ir/Led Board And 3D Ir Board; Wifi Board - Philips 32PFL8605H/12 Service Manual

EN 24 4. Q551.1E LA
4.9.6 Ambilight Units
Refer to Figure 4-29 for details.
Note: the Ambilight units are to be swapped on PWB level.
3
2
Figure 4-29 Ambilight units
1. Remove the rim as described earlier.
2. Unplug the flat foil(s) [1].
3. Release the clips [2] that secure the PWB.
4. Slide the PWB out of the set [3].
4.9.7 Keyboard Control Board
1. Remove the IR/LED panel as described earlier.
2. Remove the plastic rim as described earlier.
The Keyboard Control Panel is constructed together with the
stand support ("leading edge" assembly) and cannot be
swapped separately.
When defective, replace the whole assembly.
4.9.8 C-balancer Board
Refer to Figure 4-24 for details.
2
Figure 4-30 C-balancer board
1. Unplug all connectors [1].
2. Remove the screws [2].
3. Take the board out.
When defective, replace the whole unit.
4.9.9

IR/LED Board and 3D IR board

Refer to Figure 4-31 for details. Both boards are mounted
similary.
3
1
Figure 4-31 IR & LED Board
2010-Oct-01
Mechanical Instructions
1
2
18754_109_100923.eps
1 1
2 2
18750_115_100415.eps
2
3
1
18754_110_100924.eps
1. Remove the rim as described earlier.
2. Remove the fixation screws [1].
3. Remove the connectors [2] on the board.
4. Release the clips [3] that secures the board to it's plastic
holder.
3 When defective, replace the whole unit.

4.9.10 AV PIP Board

Refer to Figure 4-32
100923
2
2
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Take out the board.

4.9.11 Wifi Board

Refer to Figure 4-32
2
100415
1. Unplug the USB connector [1].
2. Remove the fixation screw [2] and take of the plastic cover.
3. Unplug the two coaxial connectors [3].
100924
4. Take out the board.
back to
div. table
for details.
2
1
2
18754_111_100924.eps
Figure 4-32 AV PIP board
for details.
2
18754_112_100924.eps
Figure 4-33 WiFi board
2
2
100924
3
1
100924