Tcon/Vcom Alignment; Overview Matrix Correction Table - Philips 32PFL8605H/12 Service Manual

EN 46 6. Q551.1E LA
Table 6-3 White D alignment values - LED - Minolta CS-200
Value Cool (11000K)
x 0.276
y 0.282
If you do not have a colour analyser, you can use the default
values. This is the next best solution. The default values are
average values coming from production.
• Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
• Set the RED, GREEN and BLUE default values according
to the values in Table
• When finished press OK on the RC, then press STORE (in
the SAM root menu) to store the aligned values to the NVM.
• Restore the initial picture settings after the alignments.
Table 6-4 White tone default setting 32" (Monet)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-5 White tone default setting 32" (Rubens)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-6 White tone default setting 37" (Monet)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-7 White tone default setting 40" (Monet)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-8 White tone default setting 40" (Rubens)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-9 White tone default setting 46" (Monet)
White Tone
Colour Temp
Normal
Cool
Warm
2010-Oct-01
Alignments
Normal (9000K) Warm (6500K)
0.287 0.313
0.296 0.329
6-4.
e.g. 32PFL8605x/xx
R G B
127 124 99
126 126 115
127 115 56
e,g, 32PFL9705x/xx
R G B
127 112 103
125 121 124
127 107 59
e.g. 37PFL8605x/xx
R G B
127 98 99
122 111 127
127 101 66
e.g. 40PFL8605x/xx
R G B
127 118 88
126 126 106
127 109 54
e.g. 40PFL9705x/xx
R G B
127 111 117
121 117 127
127 109 78
e.g. 46PFL8605x/xx
R G B
127 122 100
121 127 115
127 115 67
Table 6-10 White tone default setting 46" (Rubens)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-11 White tone default setting 52" (Monet)
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-12 White tone default setting 58" (Rubens 21:9)
White Tone
Colour Temp
Normal
Cool
Warm
6.3.2 Ambilight
Every ambient light module is aligned by a matrix and by the
brightness. After replacement of a module, the brightness/color
must be aligned with the other modules:
1. Go to SAM.
2. Select "Alignments".
3. Select "Ambilight". A white test pattern shall be displayed
by the ambilight modules.
4. Select the number of the module that have to be aligned.
Module 1 is the first one which will come across according
the wiring path, starting at the small signal panel,
proceeding towards the ambient light modules.The first
module will be attached to the next module 2. Module
number 2 to number 3 etc..as follows the way to define the
ambilight module numbering.
5. Align the brightness compaired with the neighbouring
modules. The brightness is automatically stored.
6. Select one of 10 matrixes which color matches most with
the neighbouring modules, "matrix 0" is the factory
alignment and can always be retrieved. (see table

Overview matrix correction table

7. The alignment is stored automatically.
Table 6-13 Overview matrix correction table
Matrix #
Matrix 0
Matrix 1
Matrix 2
Matrix 3
Matrix 4
Matrix 5
Matrix 6
Matrix 7
Matrix 8
Matrix 9
6.3.3

TCON/VCOM alignment

Sets with forward integration have the TCON on SSB. The
alignment of this TCON is stored in the SSB, and is related to
the used display. When an SSB or a display is replaced, a new
value must be entered.
A default value (see table below) is copied from the display file
(after entering the correct display code) and is shown in the
SAM menu. But on top of this, the default value can be
overruled manually via the menu item "TCON alignment".
back to
div. table
e.g. 46PFL9705x/xx
R G
127 119
114 117
127 112
e.g. 52PFL8605x/xx
R G
t.b.d. t.b.d.
t.b.d. t.b.d.
t.b.d. t.b.d.
e.g. 58PFL9955x/xx
R G
127 109
126 109
127 104
fR fG
1 1
1 0.95
0.95 1
0.95 0.95
0.95 1
1 0.95
1 1
1 0.97
0.97 0.95
0.95 0.97
B
112
127
87
B
t.b.d.
t.b.d.
t.b.d.
B
115
127
83
"6-13
fB
1
0.95
0.95
1
1
1
0.95
0.95
1
1