Mitsubishi fx2nc-485adp Manual page 22

Cable Diagram 3
Display
(Connection Port)
*1
GP (COM1)
AGP-3302B (COM2)
*2
ST (COM2)
*3
IPC
*5
GP (COM2)
*1 All GP models except AGP-3302B
*2 All ST models except AST-3211A and AST-3302B
*3 Only the COM port which can communicate by RS-422/485 (4 wire) can be used.
IPC COM Port (page 5)
*4 When using FX1N-485-BD, FX2N-485-BD, FX3U-485-BD or FX3G-485-BD, the cable length must be 50
meters or less.
*5 All GP models except GP-3200 series and AGP-3302B
• The shield of cables connected to FX2N-485-BD, FX1N-485-BD, FX2NC-485ADP and FX3U-
485ADP must be D-class grounded.
• Connect the shield of cable connected to FX0N-485ADP to the adapter FG terminal. In addition,
always connect the FG terminal of FX0N-485ADP to the ground terminal of External Device body
with D-class grounded.
• FX3U-485-BD, FX3U-485ADP and FX3G-485-BD have built-in termination resistance. Use the
termination resistance switch to set termination resistance.
GP-Pro EX Device/PLC Connection Manual
COM port conversion adapter
CA3-ADPCOM-01
A Connector terminal block conversion adapter
CA3-ADPTRM-01
B
Online adapter by Pro-face
CA4-ADPONL-01
Connector terminal block conversion adapter
C
CA3-ADPTRM-01
Online adapter by Pro-face
CA4-ADPONL-01
D
Cable
by Pro-face
+
by Pro-face
+
Your own cable
Your own cable
+
by Pro-face
+
Your own cable
+
Your own cable
22
FX Series Computer Link Driver
Notes
The cable length must be
*4
500 meters or less.
The cable length must be
*4
500 meters or less.