Mitsubishi fx2nc-485adp Manual page 16

Setup Items
Use an integer from 0 to 255 to enter standby time (ms) for Display from receiving packets to
transmitting next commands.
Wait To Send
• Set the value more than twice as the scanning time of External Device when connecting to
You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.
RI/VCC
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
Device Setting
To display the setting screen, click
Settings ] of [Device/PLC Settings ].
When [Allowable No. of Device/PLCs] is multiple, click
Settings] to add another External Device.
Setup Items
Station No.
GP-Pro EX Device/PLC Connection Manual
FX0N, FX1S, FX1N and FX1NC Series.
([Setting]) of External Device you want to set from [Device-Specific
Enter a station number of External Device, using 0 to F.
Setup Description
from [Device-Specific Settings] of [ Device/PLC
Setup Description
16
FX Series Computer Link Driver