Mitsubishi fx2nc-485adp Manual page 17

4.2 Setup Items in Off-Line Mode
• Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line
mode or about the operation.
Cf.
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in off-line mode. Touch the
External Device you want to set from the displayed list.
Setup Items
Select the SIO type to communicate with the External Device.
To make the communication settings correctly, confirm the serial interface specifications of
SIO Type
Display unit for [SIO Type].
We cannot guarantee the operation if a communication type that the serial interface does not
support is specified.
For details concerning the serial interface specifications, refer to the manual for Display unit.
Speed
Select speed between the External Device and the Display.
Data Length Select data length.
Parity
Select how to check parity.
Stop Bit
Select stop bit length.
Select the communication control method to prevent overflow of transmission and reception
Flow Control
data.
Use an integer from 1 to 127 to enter the time (s) for which Display waits for the response from
Timeout (s)
the External Device.
In case of no response from the External Device, use an integer from 0 to 255 to enter how many
Retry
times Display retransmits the command.
GP-Pro EX Device/PLC Connection Manual
Maintenance/Troubleshooting Manual "2.2 Off-line Mode"
Setup Description
17
FX Series Computer Link Driver
continued to next page