AddPac AP-IPNext SMT User Manual page 74

SMM - Conference Management
Settings of Ad-Hoc Defaults are already registered basically when Conference Rooms is performed. Then select,
double-click and perform Properties from the pop-up menu This Conference Room is the configuration used for Ad-Hoc
Conference from the system, so it can not be deleted.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Ref.
1
2
3
⑪
4
5
6
7
8
9
10
11
Register a name of Conference.
Register a description of Conference
Select a type of media (Audio, Video + Audio) for Ad-Hoc Default. According to the
type of media is selected, the settings of video can beenabled or disabled.
Select Media Class to be applied to Conference Room. Media Class can be set
to 3 participants at maximum and 1 must be selected at least. Media Class
takes a priority as the fist Media Class does not support, the second one does.
Set a priority for the Conference
Set a range of participants who can take the floor.
-All Participants can speak
-All Visible Participants : all the participants displayed on the layout can speak
-Floor + Chair : Only the participants with the floor and Chair can speak
Floor Only : Only the participants with the floor can speak
Set encryption mode (AES, DES, 3-DES) for video and voice data of
Conference
Allow the terminals which do not support encryption to participate into
Conference
This is an option to select whether the conference call is to be terminated when Chair
Man, who invites the Conference Call, terminates a call when he/she ends. When the
option is selected, Conference Call ends when Chair Man terminated his/her call.
When the floor does not exist in Conference, Set the screen for the speaking
participant to be stretched automatically
This is to configure the settings of video for the media type which is Video + Audio.
-Terminal : These are the characteristics of video transmitted from the participating
Terminals (optional)
Layout : Configuration of the layout for video
74
Description
AddPac Technology