AddPac AP-IPNext SMT User Manual page 44

SMM-Device Management-Trunk Gateway- Registering Information of Call Control
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
SMM - Trunk
Ref.
1
Selecting Partition Access List for setting up authorization of inbound call.
2 Selecting Partition Access List for setting up AAR(Automatic Alternate Routing)
3 Setting up priority for inbound call
4 Selecting Inbound Access Rule for setting up authorization of inbound call rejection
using calling number pattern
5 Applying Translation Rule for outgoing and incoming
number for inbound call.
6 Selecting an option of provisioning MRBT(Ring Back Tone) for inbound call
7 Selecting an option of presenting a number of outgoing call to outbound call
Default: Default setting of Call Manager (by following Call Manager Cluster >
Options > Calling Party Presentation)
Allowed: Presenting my number to the other
Restricted : Not displaying my number to the other
8 Setting up a number of outgoing call by force (ie.: Representative Number)
Setting for don't generate CDR information, when you use more than 2 IP-PBX as
9
Trunk, don't generate outbound call for each Trunk(IP-PBX) (if you don't set this
option, the user's can be charged both of IP-PBX )
10 Setting up an option for whether Trunk is to interoperate with outbound
44
Description
call numbers to change
AddPac Technology