AddPac AP-IPNext SMT User Manual page 68

Service Code Configuration can assign 2 digit numbers at maximum starting from '#' or '*', sets up the supplementary
service numbers, which are supported from IPNext. This configuration enables/ disables the supplementary service
and more useful to the terminals not supported by SSCP, than the IP phone using Softkey which is supported by SSCP
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
ⓐ
ⓑ
ⓒ
ⓓ
ⓔ
ⓕ
SMM - Service Code
Ref.
1
Set up the code for
2
Set up the code for Call Pickup
3
Set up a call to the code which does not belong to the same group for Call Pickup
Set up the code for the phone user's absence
4
5
Set up the code for rejecting the incoming call
6 Deactivating the code from Call Reject (Absence and Do not Distub)
7
Set up the code to activate Call Waiting
8
Set up the code to deactivate Call Waiting
9
Set up the code to register the forwarding number unconditionally
10
Set up the code to register the forwarding number for the busy line
Set up the code to register the forwarding number during the phone user's
11
absence
12
Cancel the code for Call Forwarding
13
Set up the code to activate Call Forwarding unconditionally
14
Set up the code to deactivate forwarding unconditionally
15
Set up the code for Call Forwarding when the line is busy
A Set up the code to deactivate Call Forwarding when the busy line
B
Set up the code to activate Call Forwarding when the phone user is absent
C
Set up the code to deactivate Call Forwarding for absence
D Set up the code to deactivate Call Forwarding for absence
E Set up CCBS
F Cancel CCBS
68
Description
AddPac Technology