AddPac AP-IPNext SMT User Manual page 67

This service configures the settings for allowing the registered use, to the IPNext, to listen to the message at any
time and any where, when the user is away from the phone or busy on the line.
The service can be performed by locating Call Management > Configuration > Advanced Service > Unified Messaging
Service as it is shown in the following figure.
①
②
③
④
⑤
⑥
⑦
SMM – Voice Mail
Ref.
1 Enable or disable the Unified Messaging Service
2 Configure the phone numbers and partition for connecting to the message box.
Configure the phone numbers and partition for connecting to the user's
3
message box without authenticating the extension number.
4 Configure the leaving phone number and partition for the Unified Messaging
service.
5 Choose the option for audio codec to be used for the Unified Messaging
service
G.711A/Ulaw and G.729 are the supporting codec.
6 Choose the option for video codec to be used for the Unified Messaging
services
MPEG4, H.263, H.263+ and H.264 are the supporting codec.
7 Set the number of frames for each Packet
67
Description
AddPac Technology