Print Head; Carriage Motor Unit - Star Micronics NX-1020 Technical Manual

PARTS REPLACEMENT
7.

Print Head

(1) Remove
•
Printer Cover
•
Ink ribbon cartridge
•
Color ribbon holder [1]
•
Two tapping screws [2]
•
Head cable [3]
•
Print head [4]
WARNING
The print head gets hot after printing. Do not
touch it until it get cool.
(2) Adjust
•
Gap between print head and platen
Refer to item 1 of Chapter 3.
8.

Carriage Motor Unit

(1) Remove
•
Upper case unit according to the procedure de-
scribed in item 1.
•
Connector CN6 [1]
•
Three screws [2]
•
Spring [3]
•
Two screws [4]
•
Carriage motor unit [5]
Note:
The color of the connector [1] on the carriage
motor unit [5] has been changed from white to red;
however the motor itself has not been changed.
– 46 –