Star Micronics NX-1020 Technical Manual page 56

Hide thumbs Also See for NX-1020:
Table of Contents

Advertisement

MAINTENANCE AND LUBRICATION
2.
Lubrication
Lubrication is very important to maintain optimum performance and to prevent trouble.
2-1. Lubricant
The type of lubricant greatly affects the performance and durability of the printer, especially in a low temperature
environment. We recommend use of the grease and lubrication oils listed below for this printer.
Type of oil
Grease
Lubricant
2-2. Lubricating Method
When lubrication is carried out in assembly and disassembly, wash parts well to remove dust and dirt before lubrication.
Lubrication must be carried out regularly once every 6 months or after 1 million lines have been printed. Lubrication is
necessary irrespective of the regular lubrication whenever lubricant becomes deficient after cleaning or whenever parts
have been disassembled or replaced.
2-3. Lubricated Areas
NO.
[1]
Rubbing surface of TM pulley B and pulley shaft
[2]
Rubbing surface of pulley cap and stop ring
Rubbing surface of gear 58 × 0.5 and gear shaft
[3]
[5]
Rubbing surface of lift cam and shaft
[6]
Rubbing surface of gear B and shaft
[7]
Rubbing surface of gear A and shaft
[8]
Rubbing surface of ribbon change lever and carriage
[9]
Rubbing surface of lift lever and shaft
[10]
Rubbing surface of lift lever and carriage
[11]
Rubbing surface of lift lever and lift cam
[12]
Rubbing surface of ribbon change lever and lift cam
[13]
Rubbing surface of gear cover and three gears
[14]
Rubbing surface of adjusting lever and frame
[15]
Rubbing surface of bushing and carriage stay
[16]
Rubbing surface of tractor frame assy and shaft
Rubbing surface of idler gear 16 × 72 × 0.5 and shaft
[17]
Rubbing surface of idler gear 36 × 0.5 and shaft
[18]
[19]
Rubbing surface of color ribbon holder and carriage
Rubbing surface of PF idler gear 28 × 0.5 and shaft
[20]
[21]
Rubbing surface of PF clamp lever and shaft
[22]
Rubbing surface of roller holder and lower case
Product name
FLOIL GB-TS-0
KF96 (1000 cs)
Mobil 1
Lubricating Point
– 52 –
Maker
Kanto Chemicals Co., LTD.
Shinetsu Chemical Industry
Mobil oil
Grease/Oil
GB-TS-0
GB-TS-0
GB-TS-0
KF96
GB-TS-0
GB-TS-0
KF96
KF96
KF96
KF96
KF96
GB-TS-0
GB-TS-0
Mobil 1
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0
GB-TS-0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-200

Table of Contents