Lcd Panel Type Check - Eiki LC-WB200 Service Manual

Optical Parts Disassembly

LCD Panel Type Check

There are  types of LCD Panel/Prism Ass�� y for this model. Either L-Type or R-Type LCD Panel/Prism Ass�� y is used
on the projector. Check which type of LCD Panel/Prism Ass�� y is used with the figure below.
Since both have no compatibility, same type of the LCD Panel/Prism assy must be used for replacement. If not, it
may have a serious effect on the optical characteristics.
How to check the type of LCD Panel/Prism Ass'y
L-Type LCD Panel/Prism Ass'y
IMPORTANT NOTICE on LCD Panel/Prism Ass'y Replacement
LCD panels used for this model cannot be replaced separately. Do not disassemble the LCD Panel/Prism Ass'y.
These LCD panels are installed with precision at the factory. When replacing the LCD panel, should be replaced
whole of the LCD panels and prism ass'y at once.
When replacing LCD Panel/Prism ass'y, take the optical and electrical adjustments following to the chapter "Adjust-
ment".
R-Type LCD Panel/Prism Ass'y
G-LCD Panel
-0-