Philips DVDR 725H/05 Operating Instructions Manual page 70

Thanks to this programming system, you no longer need to tediously
enter the date, programme number, start and finish times. All the
information needed by the DVD recorder for programming is
contained in the PlusCode programming number. This 9-digit PlusCode
number is found in most TV listing magazines.
1 Switch on the TV. If required, select the programme number for
the DVD recorder.
2 Press TIMER s
7
on the remote control.
P
The ' ' screen will appear
3 Press the red function button ('
4 Enter the entire PlusCode number. This number is up to 9 digits
long and can be found next to the start time of the TV programme
in your TV listings magazine.
e.g.: 5-234-89 or 5,234 89
Enter 523489 for the PlusCode-number.
Use therefore the number buttons 0..9 on the remote control.
If you make a mistake you can press D
button to go back a position.
5 Confirm with OK
L
.
D
') .
K
or the green action
a
b
L
OK
a
b
TIMER s 7
b
P
The decoded data appears after confirmation.
You can use the colour buttons to make the following settings.
First, the right tile must be highlighted ( C
the functions (descriptions) in the corresponding colour field
before pressing a button.
6 If all information is correct, press the OK
stored.
7 To end, press TIMER s
If one or more recordings have been programmed '
on the display.
M
button). Check
L
button. The data is
7
.
' will light up