Philips DVDR 725H/05 Operating Instructions Manual page 30

1 Tune your external receiver to the TV channel which transmits the
GUIDE Plus+ ® data.
If this TV channel is available on the internal tuner of the
DVD-recorder, select the TV channel on the DVD-recorder
using CHANNEL q
2 If you did not find your country in this list, no TV channel will
provide the GUIDE Plus+
Refer to the internet page http://www.europe.guideplus.com to
find further information and tips.
Deutschland Eurosport
Österreich Eurosport
Schweiz (Deutsch) Eurosport
United Kingdom ITV
France Canal+
España Tele 5
Music Factory (TMF) /
Nederland
Eurosport
- Eindhoven Music Factory (TMF)
- Rotterdam Music Factory (TMF)
- Amsterdam Music Factory (TMF)
België (Flemish) Music Factory (TMF)
3 If the TV channel is only available on the external receiver, select
the programme number of the socket to which the external
receiver is connected.
If the external receiver is only connected to the aerial socket,
you must select the programme number on the DVD
recorder under which the external receiver is stored.
4 If you can switch between 'TV' and 'Radio' on the external
receiver, select 'TV'.
5 Leave the DVD-recorder and the satellite receiver switched on for
about 24 hours to load the GUIDE Plus+
P , CHANNEL r S
.
® system information.
Eurosport
Astra 19.2E
Eurosport
Astra 19.2E, Hotbird
13.0E
Eurosport
Astra 19.2E
Eurosport
Astra 28.2E
TMF Astra 19.2E
Eurosp. Hotbird 13.0E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
® data.
6 If GUIDE Plus+
® data were loaded, switch the DVD-Recorder off
with the STANDBY m 2
this time, the data will be stored in a memory to prevent them
from being erased in case of malfunction (power failure).
7 Press GUIDE/TV
and select the menubar using A
J
8 Select the '
' screen using C
9 Check the TV channels and the allocation to the programme
numbers. Switch between the two tiles using C
Select the TV channels using B
CHANNEL q P
(for page forward/backward)
Switch the TV channels you want to use to '
D
function button .
For TV channels on the external receiver, press the red
D
function button to switch to '
The press the green function button
programm number for this channel using the 0..9
(this is the same programme number as you would enter on
the external receiver for this TV channel).
0 End using GUIDE/TV
J
button for approx.10 minutes. During
I
M and confirm using B
B
D C
M , D
O , A I , CHANNEL r
' using the red
E
and enter the
X
.
.
O
.
K
.
S
,
'
buttons