Important - Philips DVDR 725H/05 Operating Instructions Manual

Always ensure the local mains voltage matches the voltage range
printed on the type plate at the back or bottom of the DVD-recorder.
If not, consult your dealer or Philips customer support.
1 Switch on the TV.
2 Insert the supplied mains cable
4MAINS J
at the back of the DVD recorder and the plug into
the wall socket.
After successfully connecting your DVD recorder to the TV and other
additional devices, the initial installation can start. After the basic
settings for DVD-playback, the DVD recorder automatically seeks and
stores all available TV channels.
The settings can be changed later. Refer to 'User Preferences/Settings
II'.
D
into the socket
P
The most important features of the DVD recorder appear as
scrolling text on the display.
After the first installation is completed (all TV channels
installed) this function will be switched off.
1 Press STANDBY m
2
STANDBY-ON m 1
on the front.
P
' ' and then '
P
If your TV
number for the input socket, e.g. 'EXT', '0', 'AV', you see the
following screen:
a
b
b
b
N
TO TV-I/O
M
AUX-I/O
on the remote control or
' will appear on the display.
to the programme
EXT2
EXT1