Philips DVDR 725H/05 Operating Instructions Manual page 18

3 Select the '
' symbol using B
C M
.
4 Select the line '
confirm with C
M
.
5 Select your setting with B
output (YUV signal) is switched on, S-video (Y/C) and composite
video (FBAS/CVBS) signals can not be simultaneously transmitted.
The 'RGB' signal is switched off.
The choices are:
Component Video (YUV) and S-Video(Y/C).
GUIDE Plus+ ® menus only available on YUV ouput sockets.
Component Video (YUV) and Composite Video (FBAS/CVBS).
GUIDE Plus+ ® menus only available on YUV ouput sockets.
With all other settings, the signal is switched off at the
COMPONENT VIDEO OUT
displayed as information on the screen.
For more information on the other settings, refer to 'Picture
settings' ('
6 Confirm with OK
L
.
O or A I
and confirm with
ï
' using A I or B O
or A
O I
. When the YPbPr
R
sockets. This will also be
') in chapter 'User preferences/Settings II'.
7 Use a component video cable
green cinch sockets COMPONENT VIDEO OUT
of the DVD recorder to the corresponding three component
video (interlaced) input sockets on your TV(usually labelled
'Component Video Input', 'YUV Input', 'YPbPr', 'YCbCr' or 'YUV').
Do not confuse these sockets with the five-component RGB
sockets (if available) or the yellow video (CVBS/FBAS) socket and
the two audio sockets (red/white). The five-component RGB
sockets are for the R-G-B-H-V signals (red, green, blue with
horizontal and vertical synchronisation impulse).
and
8 Use an audio (cinch) cable
socket AUDIO OUT L/R
the red/white audio input socket on your TV (usually labelled
'Audio in' or 'AV in'. See the instruction manual of your TV.)
9 If necessary, switch your TV to the component video (Interlaced)
input sockets. If there is a switch on your TV to choose between
'Interlaced' and 'Progressive scan', select 'Interlaced'. 'Progressive
scan' is not supported on this DVD-Recorder.
Consult the instruction manual of your TV.
P
The menu of the DVD recorder should now appear on the TV
screen. If not, check the cable connections and the settings on
your TV.
If necessary, store this setting on your TV.
0 End with SYSTEM MENU
H
to connect the red, blue and
R
at the back
F
to connect the red/white cinch
Q
at the back of the DVD recorder to
A
.